BGC Stonesheet™ is your #1 choice for stone wall substrate and for true masonry on timber or steel-framed buildings. A flat, square-edged sheet, Stonesheet™ comes as 9mm-thick panels.
Designed specially as a substrate for both residential interior and exterior applications, Stonesheet™ is an excellent alternative where other non-specifically designed substrates have been used.
Features & Benefits
What’s good about Stonesheet™ stone tile substrate:
Exterior and interior stone tile facades
Non-structural substrate
Classified Type A Category 3 for exterior use
Will take maximum stone facade weight of 40kg/m2
Brochures
Stonesheet™ Brochure
Stonesheet™ Specification
Innova™ & BGC Fibre Cement MSDS
Innova™ & BGC Fibre Cement Product Range Guide
Size & Thickness
Stonesheet™ Fixing
Sheets are to be fixed along all sheet edges over studs on wall cladding applications. Fixing centres must not exceed 200mm for wall cladding.
Do not place fixings closer than 12mm from sheet edges, or closer than 50mm from the sheet corners.
The sheet must be held firmly against the framing when fixing to ensure breakout does not occur on the back.
Fasteners are to be flush with sheet surfaces. Overdriving fasteners must be avoided.
For more detailed installation instructions, please download the Stonesheet™ brochure.
Stonesheet™ Joining
Stonesheet™ is joined leaving a 6mm gap between each sheet. This gap should be caulked with a polyurethane sealant prior to application of the waterproofing membrane.
For more detailed installation instructions, please download the Stonesheet™ brochure.
Tech Drawings
BIM LIBRARY NOW AVAILABLE
-
All detail drawings in one PDF
-
Sheet Fixing
Installation of Angle Bracket
Installation of Angle Bracket – Screw fixed to stud
Horizontal Relief Joint
Control Joints
Sheet Joint Lightweight Steel Framing
Internal Corners
External Corners
Ground Clearance
Get In Touch!
Contact us to help you with your next specification of Innova™ and BGC Fibre Cement products.