Create that contemporary industrial look with Greystone™ from Innova™. With 2 shades to choose from, Natural and Charcoal, as well as 2 faces to choose from, Industrial and Velvet, you can create the perfect feature wall inside or out.
Greystone™ is a prefinished panel that does not require painting or finishing on site. This reduces the need for painting trades and speeds up the building process.
Features & Benefits
What’s good about the Greystone™ facade system:
Provides a modern industrial look with 2 different shades and 2 different faces
Lightweight and easy to install using a proven installation method
Great solution when panels may be difficult to maintain. The factory applied treatment means you do not need to recoat or repaint panels, reducing maintenance costs
Australian manufactured, tested and warranted
Panels are non-combustible, which ensures a perfect cladding option for both commercial and residential projects
Primary Top Hat - Galvanised Steel
120 x 35 x 1.15mm BMT – 6000mm
120 x 35 x 1.15mm BMT – 7200mm
Intermediate Top Hat - Galvanised Steel
50 x 35 x 1.15mm BMT – 6000mm
50 x 35 x 1.15mm BMT – 7200mm
Horizontal Backing Strip
EPDM Foam Gasket
Set-out and pre-drill the holes in the panels to be mounted. Screw holes must be pre-drilled, allowing 1mm clearance over diameter of screw. Holes must be drilled using a masonry drill bit. Do not use an impact drill. Fasteners should be placed at a minimum of 40mm from any edge and 80mm minimum from any corner.
For more detailed installation instructions, please download the Greystone™ brochure.
Apply the EPDM Foam Gasket to the primary 120mm Top Hat. The seal can be applied to the mounted Top Hat in situ or it can be applied to the Top Hat before it is fixed to the steel frame. Ensure that the EPDM Foam Gasket is applied to the centre of the purpose designed Primary 120mm Top Hat.
For more detailed installation instructions, please download the Duracom™ brochure.
All details in one PDF
Top Hats Position
Top Hats With Fasteners
Fixing Seal To Top Hat
Pre-marked and pre-drilled panels
Inserting Horizontal Backing Strip
Apply 2 beads of polyurethane sealant
Overlapping of Horizontal Backing Strip
Installing Next Panel
Slab Edge With Ground Clearance
Facade Deflection Head
Square Corner External
Square Corner Internal
Angled External Corner
Angled Internal Corner
Window Sill Detail
Vertical Control Joint at Dissimilar Materials
Vertical Control Joint
Alternative Vertical Control Joint
Horizontal Construction Control Joint
Thermal Break Detail 1
Thermal Break Detail 2
Boundary/Exterior Walls Timber Frame
Boundary/Exterior Walls Steel Frame